Home Car Charger 32A Gbt Charging Cable

Basic Information

The GBT standard Ac Ev Charger Plug is an AC charging gun that complies with the Chinese national standard GB/T 20234; The charging gun with seven holes design, similar to the European standard Type 2 charging gun, but not exactly the same;

This Ac Ev Charger Gb/T Plug can be used to produce GBT standard chargers for charging cars equipped with GBT charging inlet sockets; This charging gun is available in 16A, 32A, and 63A options, supporting single-phase and three-phase charging;

Product: Home Car Charger 32A Gbt Charging Cable

Rated: 32A  240V AC 7KW

More details about this Home Car Charger 32A Gbt Charging Cable, please contact our sales team.

We focus on the research and production of electric vehicle charging equipment. Our main products include electric vehicle charging connectors (charging plugs, charging sockets, and adapters), electric vehicle charging stations (AC chargers and DC charging stations), and accessories.
Our EV charging connectors has a sturdy and durable structure that can adapt to various environmental conditions. It has obtained TUV and UL certificates to ensure the safety of the charging process.

What is the Flame retardance of the Home Car Charger 32A Gbt Charging Cable?

Answer: UL94-V0

More information about UL94-V0:

Definition: Flame retardancy describes how effectively a material resists ongoing burning, though it does not imply that the material is entirely immune to ignition. Flame retardant ratings indicate how well a substance or material can delay the progression of flames once it has been treated. This classification system includes various grades for plastics, which range incrementally from HB to V-2, V-1, and finally V-0.

GBT charging cable Flame retardance UL94-V0 Test program:

A total of 10 samples (2 sets) are tested for each thickness. Five samples of each thickness were placed at 23 ℃ and 50% RH for 48 hours before testing. Five samples of each thickness were placed at 70 ℃ for 7 days before testing.
Place the sample perpendicular to the long axis and install it. When installing, place the lower end of the sample at a distance of 3/8 from the top of the combustion tube. Place a blue flame with a height of 3/4 at the center of the lower end of the sample, burn for 10 seconds, and then remove the flame (at least 152mm away from the sample); If the sample drips down one by one, the liquid drips onto a layer of untreated cotton underneath the sample, which is placed 12 inches below the sample.
Level requirement: 94V-0
A: No sample had flames burning for more than 10 seconds (with flame burning time) after the test flame was removed.
B: For each set of 5 samples, the total burning time with flames after 10 ignitions shall not exceed 50 seconds
C: No samples burned all the way to the fixture (including flames and redness)
D: Without any samples, the burning and melting droplets ignited the cotton at 12 inches below.
E: There were no samples, and after the second removal of the test flame, they continued to burn red for more than 30 seconds (flameless combustion time).

Hot Tags: home car charger 32a gbt charging cable, home car charger 32a gbt charging cable suppliers, manufacturers, factory, gbt electric car plug, electric vehicle charging plug, electric car plug 125A, 150A ev plug in stations, ev charging socket gbt, ev charging station plug 200A