Description

Technical Parameters

Product diagram

1.LED Light 2.LCD Screen 3.Rfid 4.Charging cable 10.4G/WIFI Antenna 11.LAN port 13. E-STOP

5.LCD Screen 6.Rfid 7.LED Light 8.Type2 Socket 9.4G/WIFI Antenna 12.LAN port 14. E-STOP

product-790-1411

product-790-1480

product-790-1338

Maintenance

- Always ensure that the charging gun is inserted back into the charging gun

holder of the EV charger after charging.

- Check the EV charger and the charging cable regularly for damage. If damage is

found, please contact us.

- This EV charger does not contain user-serviceable components. If the unit is

not functioning properly, contact us.

- Wipe the exterior of the EV charger, the charging cable, and the EV charger

end of the charging cable with a clean, dry cloth to remove dirt and dust build

product-790-1998

Safety Precautions and Warnings

Read all instructions carefully before installation. Pay special attention to the following matters:

As the installation process of this charging station involves electrical construction, it is necessary to be

installed by professional technicians according to the instructions to ensure safety. If the charging station is

damaged during installation or if the improper installation results in improper use of the charging station at

a later stage, it will not be eligible for our warranty service.

If the site to be installed is under construction, please do not install it immediately. Construction materials,

dust, paint, etc. can cause damage to the charging station. It is recommended to install the EV charger after

the construction is completed.

The EV charger should use a special power supply or interface, must be well grounded, fire zero wiring is

strictly prohibited to reverse. Before wiring, please switch off the power supply and take reasonable measures

to prevent the power switch from closing automatically.

When installing, please wear protective gloves to prevent the metal parts of the EV charger from hurting

your hands.

Unpacking Inspection

The EV charger is shipped with a packing list. After unpacking, refer to the packing list and check whether

each part of the components are complete. If there are any defects, please contact us in time.

Hot Tags: type1 dual plug wallbox charger, type1 dual plug wallbox charger suppliers, manufacturers, factory, ev type 2 charger, Home AC EV Charger, Mode2 EV Charger, ocpp charger, public car chargers, wallbox charger

More Details

Firmware Upgrade	Local USB disk manual upgrade or OCPP remote upgrade
Configure the charger	Local USB disk manual Configure or or Manual set on charger's screen or OCPP remote
	OCPP Mode (WS:// or WSS://), Charger Number, Vendor, Server IP, OCPP Path,Network Type (WLAN, Ethernet, 4G), Current, Phase, QR code, APN, Password, PWM Compensate, Overload, screen Brightness, Time Zone, Settings Protect level etc...
OCPP Commands	Boot Notification
	Heart Beat
	Change Availability
	Change Configuration
	Remote Start Transaction
	Remote Stop Transaction
	Reset
	Unlock Connector
	Update Firmware
	Reserve Now
	Cancel Reservation
	Trigger Message
	Get Composite Schedule
	Clear Charging Profile
	Set Charging Profile
	Data Transfer	SET
		GET
	Get Configuration	GetConfigurationMaxKeys
		NumberOfConnectors
		MeterValueSampleInterval
		MaxChargingProfilesInstalled
		ChargeProfileMaxStackLevel
		SupportedFeatureProfiles
		ChargingScheduleAllowedChargingRateUnit
		ConnectorSwitch3to1PhaseSupported
		TransactionMessageAttempts
		TransactionMessageRetryInterval
		ReserveConnectorZeroSupported
		LightIntensity
		WebSocketPingInterval
		HeartbeatInterval
	Set Configuration	MeterValueSampleInterval
		LightIntensity
		TransactionMessageAttempts
		TransactionMessageRetryInterval WebSocketPingInterval
Local language	Support, the charger max support two different language
Charging History	Can find in charger's screen in local or find in ocpp server
Fault History	Can find in charger's screen in local or find in ocpp serve

Type1 dual plug wallbox charger