Product Features
• Indoors and Outdoors - IP65 rated for water and dust resistance. 7KW vehicle charging pointis safe for use in bad weather conditions.
• Business Partner - The mid certified electricity meter complies with the European public charging station measurement standard and can be used for collecting money from users.
• Smart - The 7KW vehicle charging point can connect to any ocpp 1.6j ocpp server to wirelessly control and monitor he charger via Wifi or 4G or Ethernet.
• High Compatibility - The 7KW vehicle charging point compatible with all IEC 62196 type2 EVs currently available on the market.






Safety factors of home charging stations
There are various safety factors for home charging stations, which you can also consider when purchasing or selecting a charger.
- Charging station hardware safety
High-quality home electric vehicle charging stations usually have multiple safety measures. For example, many charging devices are UL certified or other similar safety certifications, which means that they meet certain safety and quality standards.
In addition, these charging devices usually have multiple safety features built in, such as mechanisms to prevent overheating, overload, and short circuits, to ensure the safety of the charging process.
- Electrical system compatibility
Before installation, it is crucial to evaluate the compatibility of the home electrical system. If the home power system cannot bear the additional load required by the charging station, it may cause electrical failure or fire.
Therefore, it is recommended that electric vehicle owners hire a professional electrician to evaluate the home electrical system and upgrade it if necessary before installing the charging station to ensure that it can safely and stably support the use of the charging station.
- Charging environment safety
The choice of charging environment is also one of the key factors affecting the safety of home charging stations. Ideally, the charging station should be installed in a well-ventilated garage or outdoors to avoid the risk of overheating or battery leakage due to poor ventilation.
Fire and water prevention measures should also be taken to cope with the possibility of extreme weather and accidents.
Potential risks and solutions of home charging stations
- Overheating and fire risks
During the charging process, both electric vehicle batteries and charging equipment may overheat, especially in high temperature environments or when used for a long time. Overheating may cause fire risks.
Therefore, choosing charging equipment with overheating protection function and keeping the environment ventilated and cool during charging are effective ways to prevent overheating. In addition, avoiding long-term charging in hot weather can also help reduce the risk of overheating.
- Electric shock and electrical safety issues
Electric shock is another safety issue that requires special attention when using home charging stations. If the charging equipment or cable is damaged, or if it is improperly handled during charging, electric shock incidents may occur.
To prevent electric shock accidents, electric vehicle owners should regularly check the integrity of the charging equipment and cables to ensure that they are not worn or damaged. In addition, users should follow the correct operating procedures when plugging and unplugging the charger to avoid live operation.
- Equipment aging and damage
Over time, the cables, plugs and other hardware of home charging stations may wear and age. This wear and tear can cause electrical failures or even fires.
Regular inspection and replacement of aging equipment can prevent potential risks. It is recommended that electric vehicle owners check their equipment at least 1-2 times a year and replace or upgrade it if necessary.
Hot Tags: type1 wallbox ev charger, type1 wallbox ev charger suppliers, manufacturers, factory, 3 phase car charger, 7KW 22KW Electric Car Level 2 Smart EVSE 16A 32A OCPP 1 6 AC Commercial EV Charger, Dual 22KW Outlet OCPP 1 6 Public Quick Charging 44KW Level 2 EV Charger, electric wall charger, ev battery charger, ev quick charger
More Details
|
Firmware Upgrade |
Local USB disk manual upgrade or OCPP remote upgrade |
|
|
Configure the charger |
Local USB disk manual Configure or or Manual set on charger's screen or OCPP remote |
|
|
OCPP Mode (WS:// or WSS://), Charger Number, Vendor, Server IP, OCPP Path,Network Type (WLAN, Ethernet, 4G), Current, Phase, QR code, APN, Password, PWM Compensate, Overload, screen Brightness, Time Zone, Settings Protect level etc... |
||
|
OCPP Commands |
Boot Notification |
|
|
Heart Beat |
||
|
Change Availability |
||
|
Change Configuration |
||
|
Remote Start Transaction |
||
|
Remote Stop Transaction |
||
|
Reset |
||
|
Unlock Connector |
||
|
Update Firmware |
||
|
Reserve Now |
||
|
Cancel Reservation |
||
|
Trigger Message |
||
|
Get Composite Schedule |
||
|
Clear Charging Profile |
||
|
Set Charging Profile |
||
|
Data Transfer |
SET |
|
|
GET |
||
|
Get Configuration |
GetConfigurationMaxKeys |
|
|
NumberOfConnectors |
||
|
MeterValueSampleInterval |
||
|
MaxChargingProfilesInstalled |
||
|
ChargeProfileMaxStackLevel |
||
|
SupportedFeatureProfiles |
||
|
ChargingScheduleAllowedChargingRateUnit |
||
|
ConnectorSwitch3to1PhaseSupported |
||
|
TransactionMessageAttempts |
||
|
TransactionMessageRetryInterval |
||
|
ReserveConnectorZeroSupported |
||
|
LightIntensity |
||
|
WebSocketPingInterval |
||
|
HeartbeatInterval |
||
|
Set Configuration |
MeterValueSampleInterval |
|
|
LightIntensity |
||
|
TransactionMessageAttempts |
||
|
TransactionMessageRetryInterval |
||
|
Local language |
Support, the charger max support two different language |
|
|
Charging History |
Can find in charger's screen in local or find in ocpp server |
|
|
Fault History |
Can find in charger's screen in local or find in ocpp serve |
|







