32A 7KW Tesla NACS Portable Electric Vehicle Charger

Basic Information

Product Decription

The 32A 7KW Tesla NACS Portable Electric Vehicle Charger serve as efficient devices designed for charging electric vehicles. These chargers present a practical and adaptable solution, particularly well - suited for overnight charging following daily short trips.

One of the notable advantages is the elimination of the need to incur high costs by hiring an electrician for installation. Thanks to their sleek and lightweight design, the charger box is approximately the size of an adult's palm, and the entire charger tips the scales at just around 2.5 kilograms. This compact form factor makes installation a breeze, requiring no professional assistance.

When it comes to usability, this 32A 7KW Tesla NACS Portable Electric Vehicle Charger offers remarkable convenience. It can be used effortlessly in any location equipped with a standard household power outlet, much like the ease of charging a mobile phone. For those on the go, it can be neatly packed into a handbag or stored in the car's trunk, enabling timely charging wherever and whenever needed. On the other hand, if portability is not a priority, it can be placed in any corner of the garage due to its minimal space requirement. Additionally, a hook can be used to securely fasten the charging device to the wall, and all the necessary accessories for such setups are provided.

What Ingress Protection of the charger?

The ingress protection of this 32A 7KW Tesla NACS Portable Electric Vehicle Charger reaches IP66.

IP66 means that the product is completely protected from foreign objects and dust. When subjected to violent waves or strong water spray, the water inflow of the appliance should not reach a harmful effect.

What is Ingress Protection ?

IP (INGRESS PROTECTION) refers to the protection level of the outer shell of equipment such as lighting equipment and instruments.

The Ingress Protection or IP rating is a rating system defined by the international standard EN 60529 to measure the degree of protection of any electrical equipment against foreign objects (dust, wires, etc.) and moisture (water). It is a two-digit rating system where the first digit indicates protection against the ingress of solid objects and the second digit indicates protection against the ingress of liquids.

 Dust proof Ingress Protection
Definition of Number Protection Level: 
0. No protection, no special protection
1. Prevent objects larger than 50mm from entering and prevent accidental contact with internal components of electrical equipment by the human body
2. Prevent objects larger than 12mm from entering and prevent fingers from touching internal parts of electrical equipment
3. Prevent the intrusion of objects larger than 2.5mm to prevent the intrusion of tools, wires, or objects with a diameter larger than 2.5mm
4. Prevent objects larger than 1.0mm from entering. Prevent mosquitoes, flies, insects, or objects with a diameter larger than 1.0mm from entering
5. Dust prevention cannot completely prevent dust from entering, but the amount of dust entering will not affect the normal operation of the electrical system
6. Dust tight to completely prevent dust from entering

 Waterproof Ingress Protection
Definition of Number Protection Level:
0. No protection, no special protection
1. Prevent water droplets from entering and prevent vertically dripping water droplets
2. Even when tilted at 15 degrees, it still prevents dripping water from entering. When electrical equipment is tilted at 15 degrees, it still prevents dripping water
3. Prevent the intrusion of sprayed water and prevent rainwater or water sprayed in a direction with a vertical angle less than 50 degrees
4. Prevent splashing water from entering and prevent splashing water from all directions from entering
5. Prevent the intrusion of large waves or water sprayed rapidly from spray holes
6. Prevent the intrusion of large waves into electrical equipment. Even under certain time or water pressure conditions, the equipment can still operate normally
7. Preventing water intrusion into electrical equipment. Under certain water pressure conditions, it is still possible to ensure the normal operation of the equipment
8. Preventing the Effects of Sinking

Senku Machinery

Senku is a professional manufacturer of electric vehicle charging products. Our products include charging connectors, Mode 2 charging, AC charging piles, and DC charging piles. We are also willing to provide more services to our customers - supporting them in building charging pile factories locally and helping them achieve localized production to respond more quickly to local customer needs; We look forward to hearing from you.

Know More

 

Our factory & quipment

 

With rich experience and research institutions, advanced equipment and professional technical teams, SENKU MACHINERY can design, produce, develop and provide high quality products for enterprises and clients, by taking advantages of abundant industrial resources and extrusive influential, SENKU MACHINERY carries out consultations services related to products, technologies, market and projects

Pre-processed Material Area

product assembly area

laboratory&Testing Equipments

Warehouse

Contact Now

Hot Tags: 32A 7KW Tesla NACS Portable Electric Vehicle Charger, 32A 7KW Tesla NACS Portable Electric Vehicle Charger suppliers, manufacturers, factory, home car charger, home ev charger, portable ev car charger, portable ev charger level 2, portable evse level 2, smart ev home charger