Basic Introduce
The 30KW CCS CHADEMO GBT Rectifier (REG1K0100G) with input over-voltage protection, under-voltage alarming, output over-current and short circuit protection etc...functions. And low output DC ripple wave, has no influence on battery's working lives. Can constitute parallel redundancy systems and has hot-swapped function, which improves the availability, reliability and maintainability of the electric vehicle charging system (EVSE).
Our 30KW CCS CHADEMO GBT Rectifier can convert alternating current (AC) into direct current (DC) and supply it to load or inverter after filtering. It can provide charging voltage to the battery. Therefore, it also acts as a charger. The rectifier is also used in the detection of amplitude modulated (AM) radio signals. The rectifying device is also used to provide the voltage of fixed polarity required for electric welding.
Product Features
- The 30KW rectifier with MAX 1000V DC 100A output and constant current for higher output power at low output voltage
- Air duct isolation design for high protection and reliability for harsh environment
- 3 phase without neutral eliminates the risk of high neutral currents
- Low standby power consumption with 12W. Super shandy power consumption with 2W.
- 3phase active power factor correction technology, reduces the harmonic interference to the grid
- Super denoise mode can get less 55 dB fan audio noise
- TUV CE/UL, KC Certicification, EMC class B level
Application:
30KW 1000V rectifier is design for GBT / CCS / CHAdeMo stations (EVSE) for Electric Vehicles, easily maintenance, cost efficiency, high power density and high quality.
Technical Specification
|
Electrical Ratings |
Input Voltage (AC) |
260 ~ 530V AC; 3-phase + PE |
|
Frequency |
45 ~ 65Hz |
|
|
Max Input Current |
58A |
|
|
THD |
≤ 5% |
|
|
Power Factor |
0.99 |
|
|
Output Power |
30KW @ Output Voltage > 300V DC |
|
|
Max Output Current |
100A |
|
|
Output Range |
150V ~ 1000V DC |
|
|
Efficiency |
≥ 95％,@ 350 ~ 500V DC / 680 ~ 1000V DC 60％~100％ Load current, Max point ≥ 95.5％ |
|
|
Voltage stabilization Accuracy |
≤ ±0.5% |
|
|
Current stabilization Accuracy |
≤ ±1% (20% to 100% load) |
|
|
HMI |
LED Light |
YES (Green: Normal / Yellow: Operation/ Red: Failure ) |
|
Operate handle |
YES |
|
|
Parts |
Connectors and Cables |
|
|
Communication |
Protocol |
CAN bus, Max 48 power modules parallel |
|
Address Indication |
Automatic address identification, Panel dial switch for group setting |
|
|
Noise Setting |
Power mode with max 75 dB , Denoise mode with max 65 dB , Quiet mode with max 55 dB |
|
|
Environmental Ratings |
Working Temperature |
Ambient Temp:-40℃ ~ +75℃,derating from 55℃ |
|
Storage Temperature |
Storage temp:-40℃ ~ +75℃ |
|
|
EV Charging Rectifier Cooling Method |
Fan cooling |
|
|
Protections |
30KW EV DC charging power module Protections |
Input/output voltage protection Over current/short circuit protection Over temperature protection etc... |
|
Compliance |
Complying to |
EMC/EMI: TUV CE certification, EN61851-21-2, class B |
|
Safety |
TUV UL/CE certification UL2202, EN61851-1,EN61851-23 |
|
|
Reliability |
MTBF > 300,000 h |
Hot Tags: 30kw ccs chademo gbt rectifier electric vehicle evse station charger power module, 30kw ccs chademo gbt rectifier electric vehicle evse station charger power module suppliers, manufacturers, factory, ccs2 plug, ev fast charging stations, electric car charging plugs, level 2 car charger, retractable electric car charger, electric vehicle home charging station
