Basic Introduce
TH750Q32ND–A/800DC EV DC charger power module is a high efficient and high-power density dual AC / DC input product for electric car power station.
This EV DC charger power module supports 266V AC - 494V AC voltage input, the max power 30KW and the power module with MAX power 20KW when 400V DC-860V DC voltage input. The AC DC/ DC DC power module communicates with the electric car power station controller by CAN bus.
Product Features
- The AC/DC Dual Input EV Charger Module working voltage: 266~494V/AC or 400-860V/DC
- The EV charger power module output voltage range: 200 ~ 750V DC
- Standby power consumption: < 10W
- The EV charger power module working temperature: -20 ~ +75°C
- Support parallel voltage and current regulation functions
- EAC certificated
Application:
The AC/DC Dual Input EV Charger Module with super wide constant power range 150V to 1000V DC is use on CCS2 CHAdeMo GBT CHAOJI EV Supercharger stations
Technical Specification
|
AC input Electrical Ratings |
Input Voltage (AC) |
266 ~ 494V AC; 3-phase + PE, rated voltage 380V AC |
|
Max Output Current |
50A |
|
|
Output Constant Range |
750V ~ 600V DC; 30KW 400 ~ 500V DC; ≥20KW |
|
|
Frequency |
45Hz - 55Hz (for AC input) |
|
|
THD |
≤ 5% (More than 50% load) |
|
|
Power Factor |
≥ 0.99 (Full Load; In case of AC input) |
|
|
DC input Electrical Ratings |
Input Voltage (DC) |
400-860V DC (20KW at 600-800V DC input) |
|
Max Output Current |
33A |
|
|
Output Constant Range |
606V ~ 750V DC; 20KW |
|
|
Other Electrical Ratings |
Efficiency |
>95% (Full Load) |
|
Voltage stabilization Accuracy |
≤ ±0.5% |
|
|
Current stabilization Accuracy |
≤ ±1% (20% to 100% load) |
|
|
Soft Start Time |
3 ~ 8S |
|
|
HMI |
LED Light |
YES (indicate the work state) |
|
Operate handle |
YES |
|
|
Parts |
Connectors and Cables |
|
|
Communication |
Protocol |
CAN |
|
Environmental Ratings |
IP protection level |
IP20 |
|
Working Temperature |
Operating temp:-20~50℃ (≥55℃ with limitation power output) |
|
|
Storage Temperature |
Storage temp:-40~75℃ |
|
|
EV Charging Rectifier Cooling Method |
Fan cooling |
|
|
Protections |
Electric Car Power Station Protections |
Input over-voltage, under-voltage protection, input over-current protection, phase-loss protection Output over-voltage protection and current limit protection Output back-flow prevention Environmental Temperature Detection and Protection Packet current sharing function |
|
Compliance |
Complying to |
Design meet CE standards; Product EAC certificated |
Protective Features
|
Item |
Parameters |
Remakrs |
|
Input Over-voltage protective point(AC) |
495~514 |
|
|
Input Over-voltage recovery point(AC) |
470~488 |
|
|
Input Under-voltage protective point(AC) |
242~265 |
|
|
Input under-voltage recovery point (AC) |
272~296 |
|
|
Input Over-voltage protective point(DC) |
880 |
|
|
Input Over-voltage recovery point(DC) |
870 |
|
|
Input Under-voltage protective point(DC) |
350 |
|
|
Input under-voltage recovery point (DC) |
370 |
|
|
Fan fault |
Fan fault shutdown |
|
|
Input phase loss protection |
Phase loss shutdown |
|
|
Output short-circuit protection |
Equipped |
|
|
Output over voltage protection |
Equipped |
Equipped with hardware and software dual overvoltage protection. After overvoltage , shutdown and lock. Need to re- power can be restored. |
Hot Tags: ac/dc dual input ev charger module, ac/dc dual input ev charger module suppliers, manufacturers, factory, car charging plug 300a, supercharger for electric cars, charging socket for ccs1 electric car, 500A ccs ev charging connector, ev charging plug type 2 16a, smartevse
